Philodendron Pink Princess Propagation Guide

Philodendron Pink Princess Propagation Guide
Spread the love
  • Opens in a new tab.

The Philodendron Pink Princess is one of the most stunning houseplants. The Philodendron Pink Princes, is, however, expensive, so many growers want to know the methods of Philodendron Pink Princess Propagation.

The expensive Philodendron Pink Princess’ Propagation Guide is an absolute must if we want to produce more of these exquisite plants at a less prohibitive price. To know the propagation methods and understand the anatomy of this plant will make it easier for you to follow the propagation methods discussed below.

Philodendron Pink Princess Propagation Guide

As mentioned, the Philodendron Pink Princess can be expensive,

The node is where the leaves meet the vine or stem. The node is where the roots and new growth from propagation will form. You only need one node to propagate the Philodendron pink princess.

There are three methods for Philodendron pink princess propagation.

Soil Propagation – In this method, you will propagate a stem with a leaf or leaves.

• Take a cutting with at least one leaf. Cut just below the node. If you cut below a node, the node will go with the cutting. Use of a pair of sharp and clean scissors.

• Fill a pot with moistened soil or potting mix.

• Plant the cutting. Make sure the node, not the leaves, is buried in the soil.

• Place the pot in an area with bright, indirect light.

• Cover the top of the cutting with a clear plastic bag. The plastic bag will trap beneficial humidity. Allow your plant to get some fresh air by opening the plastic bag every other day.

• Try to gently pull the cutting after a few weeks. Some resistance when you pull the cutting means it has developed a root system. You now have a new plant. Remember to keep the soil moist.

Bare Stem Propagation

• This is a fun way to propagate your Pink Princess. This method allows you have a new plant with every single node. In this method, you will be using segments of the stem minus the leaves.

• This is the best propagation method if you have stems without leaves or the leaves are not in the best shape.

• Fill your pot or container with 1/2 potting soil and 1/2 perlite. Make sure to moisten the mixture. There should not be any accumulated at the bottom.

• Cut the stem (1 1/2 inch long) on all sides of each node. Remove the leaves if there are any.

• Place the stem cutting into the pot (half-buried) or just lay the stem cutting flat on the soil mix and not plant it.

Note:

Place the ‘eyes’of the stem cutting facing up. The ‘eye’ is where the stem cutting will start to grow into a new plant. Remove the leaf or leaves from the stem to expose the ‘eye.’ If you do not see the ‘eyes’ or are not sure, just lay the stem cutting on in the soil mix.

• Place the pot in an area with bright, indirect light and not on direct sun. Direct sun will cause your plant to have sunburns.

• Cover the top of the cutting with a clear plastic bag. The plastic bag will trap beneficial humidity while letting light through. Allow your plant to get some fresh air by opening the plastic bag every other day.

• Remove the clear plastic bag once you notice some growth to allow more room for the plant to grow.

• Once your stem cutting has a leaf, transplant your new plant to its permanent pot.

You should start to get some growth after a few weeks. You will have more success propagating with this method during the Spring or Summer. These are the times when your plant is actively growing.

You will have to take care of your new plant more if you are propagating with this method. Always keep the soil moist to encourage the development of the root system.

Water Propagation

This is a simple way of Philodendron Pink Princess Propagation.

• With a pair of sharp and clean scissors take a cutting with at least one leaf. Make sure to cut below a node.

• Fill a jar with water at room temperature.

• Place the cutting in the jar. Make sure that only the node and not the leaf or leaves are under the water surface.

• The aerial nodes will grow more roots when they are under the water.

• Place the jar in an area with indirect light. Keep the jar in a warm place. The warm temperature will ensure the roots will grow faster.

• Replace the water when needed or every three days.

New roots will start to grow after a few weeks. You will be able to see aerial roots around the node. These roots will grow and extend in the water.

Once the roots are about two inches long, you can plant the cutting into its permanent pot with 3 parts potting mix and 1 part perlite.

Your goal with water propagation is to grow more roots from the cutting to make sure the plant is stable before planting it in the soil. Water the plant and care for it.

Maintaining the Pink Color of the Philodendron Pink Princess

Almost everyone wants to have a Philodendron Pink Princess in their plant collection. It is one of the most popular indoor plants because of its hot pink-colored leaves.

The Philodendron Pink Princess is so popular, nurseries cannot seem to keep up with the demand.

Because of the high demand, these plants can be quite expensive. That is the reason you need to know about Philodendron pink princess propagation.

It is not difficult to grow Philodendrons, but you need to do the right things to ensure they grow healthy and, of course, maintain the pink color of their leaves.

Variegation is when some parts of the plant have a different color. In the case of the Pink Princess, its leaves are not only dark green but pink, too.

Whatever the variegated color a plant has, it means its leaves lack chlorophyll. Plants need chlorophyll for photosynthesis and to make food from the energy of the sun.

Only parts of the leaves of the Pink Princess are pink. Some leaves of Philodendrons have a lot of pinks, while others only have bits of pink or pink patches.

While the pink color in the leaves of your Pink Princess means it lacks chlorophyll, it does not mean it will not grow healthy. Truth is, if the Pink Princess has adequate light – bright indirect light, it will thrive.

If your Pink Princess does not have enough light, it will also produce more green leaves. More green leaves mean more chlorophyll that converts the energy of the sun into sugar. This is a stress response of your Pink Princess.

If the leaves of your Pink Princess are mostly green, you may want to transfer your plant beside a window for it to receive more light. More light will make the leaves have balanced variegation – dark green and pink leaves.

On the other hand, if your Pink Princess has mostly pink leaves, it will starve because it is lacking in chlorophyll.

Direct sunlight is dangerous to your Pink Princess. The harsh sun can damage your plant. Variegated plants, such as the Pink Princess, are sensitive.

The most ideal scenario for your Pink Princess to grow healthy and vibrant and get good results:

• Place your plant near a west or east-facing window. This will protect the plant from direct sunlight.

• If the leaves of your Pink Princess are too pink, move it a bit from the bright light or window.

• Use grow lights if you cannot give your Philodendron enough sunlight.

Your plant should receive at least 8 hours of bright indirect sun each day. Enough sunlight also helps your Pink Princess produce a beautiful and more vibrant pink variegation.

Other than enough sunlight, make sure to plant your Pink Princess in the right potting mix. It will also need the right amount of water, fertilizer, temperature, and humidity.

The pink variegation is what makes growers and plant collectors love the Philodendron Pink Princess.

Grow it in the right conditions and you will be able to achieve a healthy Philodendron Pink Princess with leaves having the right dark green and pink combinations.

What is a Philodendron Pink Princess?

The Philodendron Pink Princess is a trailing plant. The Pink Princess grows well in hanging baskets and pots where its pink leaves and trailing vines create an astonishing showpiece.

Philodendron Pink Princess may be expensive, but it is in high demand as it’s become the finest of statement plants.

Many are somewhat obsessed with having this plant because of the pink patches on its leaves. It makes plant enthusiasts and gardeners always want to have it.

You can plant the Pink Princes indoors and outdoors. The dark green and pink leaves can add a unique color to your home. This plant is best grown in USDA zones 9 to 11.

Bontannical Name: Philodendron Erubescens

Common Names: Pink Princess Plant, Pink Princess Philodendron, and PPP

Native to: Columbia, Ecuador

Leaves: Dark Green, Bright Pink, Chocolate Brown / waxy

Maximum Size: 5 inches wide, 2 feet tall

Potting Medium or Soil: Aroid potting mix, moist yet well-draining

Light Requirement: Bright indirect light

Watering Requirements: Once a week

Fertilizer: 1/2 strength fertilizer every 2 to 3 weeks

Preferred Temperature: 59 to 810F (15 to 270C)

Preferred Humidity: Moderate

Although the Philodendron Pink Princess is exotic-looking, it is extremely easy to care for. It is important, though, to keep the dark-green leaves with pink patches lively and vibrant.

The Philodendron Pink Princess is known for the pink patches on its dark green leaves. The pink patches on the leaves are because it lacks chlorophyll – the chemical responsible for the green color of leaves.

The leaves have some greenness because the plant needs them for photosynthesis.

It’s a tropical plant, but the Philodendron Pink Princess grows well indoors and in your garden.

What is the Ideal Potting Mix for your Philodendron Pink Princess?

Philodendrons thrive well in high porous, high in organic matter, loose and well-drained soil. They grow well in 100% peat moss. A good-quality potting soil with 20% perlite is also good for your Pink Princess.

Philodendrons are great aroid plants to propagate. Remember, though, to only do propagation in the warm months which is the plant’s growing season.

Final Thoughts

The Philodendron Pink Princess is an Aroid Hybrid. It has become extremely popular for its variegated leaves – arrow-shaped leaves with beautiful dark green and pink. This mystic plant is a great choice for growing in pots, hanging baskets, and in the garden.

Many regard the Philodendron Pink Princess as a showstopper. It takes some time to mature into its sale-worthy size. The popularity of this plant has increased its selling price because it is considered a hot commodity – a statement plant.

Despite its dramatic appearance, the Philodendron Pink Princess is low in maintenance making it a perfect addition to your indoor plant collection.

If you are able to get hold of this plant, knowing how Philodendron Pink Princess propagation works, will ensure you will forever have this plant in your collection without spending a fortune.

Jenny Marie
Tribal Writer

Edited By
Patricia Godwin

Patricia Godwin

Patricia has many years of experience as a content writer on various subjects, but her first love is gardening. She’s never met a plant she didn’t like and, consequently, she writes about every type of plant you can think of. Once an avid gardener with a herb garden, a succulent rockery, and a rose garden – to mention a few. Nowadays, she’s constantly on the move searching for interesting plants to bring to your attention; and explain to you all the details you need to grow, care and maintain these plants.

Recent Posts