Grow tents are fantastic instruments for controlling a plant’s environment. They are great for growing plants indoors, but the humidity can be tricky to manage. Most plants, specifically seedlings, and cuttings require a high level of moisture.
To raise the humidity in grow tents, combine small and large plants, use a humidifier and propagators, hang wet towels, remove half the fluorescents, reduce the extraction fan speed, use water spray bottles, lower surrounding temperature, place water bowls at vents in grow tents, stock up on water and add an air conditioner.
Relative humidity is a measurement of the quantity of water in the air. Your plants will be healthier and survive longer if the relative humidity level is kept constant.
1. Combine Mature and Young Plants
It is a prevalent belief that larger plants will rob smaller plants of light, nutrients, and air.
On the contrary, as you start adding plants, especially bigger ones, the relative humidity in your grow tent will rise since they respire more and produce more relative humidity.
When your larger plants respire, carbon dioxide and water vapor are released, feeding their smaller siblings.
Huge plants have more stomata and larger leaves, allowing them to expel more water vapor following evapotranspiration.
Your growing plants can then use this water vapor. To ensure that your growing plants have an equal share of air, light, and nutrients, don’t overcrowd the larger plants.
2. Use A Humidifier Inside Grow Room
Investing in a humidifier has proven to be one of the best decisions a gardener has made. By extracting a cold mist, a humidifier aids in increased humidity levels in a grow tent. It is essential for the development of your growing plants.
Depending on the size of your grow tent, Increase the humidity level of your humidifier to at least 50% to 65 per cent.
If your grow tent includes a top and bottom shelf, position the humidifier on the bottom bracket. This is to avoid spraying mist straight on the grow lights.
However, some experts advise that if you leave your humidifier on full power in a restricted place, it may produce too much moisture in the air.
If at all feasible, choose a humidifier with a built-in humidistat. It will allow the machine to automatically turn off or on based on your selected moisture levels.
It is strongly advised that you should choose a humidifier that can hold at least six gallons of water and has long-lasting power.
It will assist you to control the temperature, airflow, and moisture output of your grow tent if you select the best humidifier for it.
3. Make Use of Propagators
Seedlings usually sprout under their own. But adding propagators to raise the humidity in your grow tent will increase the success rate of growing plants.
Pay attention to how indoor growers protect seedlings and cuttings in propagators.
Seeds can be kept from drying out using propagators like this one with a polyethene or glass cover sheet. They may maintain your grow tent at a high humidity level.
This will ensure that your seedlings’ root systems are not stressed while they develop and expand.
4. Build Your Propagation Set-Up
Purchase a humidifier and put an end to all of this humidifying chaos. If you already have one, make sure the dial is set to somewhere between 50 and 65 per cent.
You will not have to worry about turning off your humidifier if it has a humidistat.
However, if it does not have one, you must exercise caution. When a humidifier runs continuously in a small space, the RH rises to dangerously high levels. As a result, your growing plants will be severely harmed.
So, purchase a good humidifier or check the RH level with your grow room humidity meter regularly.
Here is a small experiment, or life tip, that several experts found useful. Start by acquiring a flexible extractor with a built-in regulator to control temperature by sucking the air out of the room.
Then, on top of your grow tent, pour a bucket of water. Use a hosepipe to convey the water to the humidifier.
Seedlings and cuttings can be helped with this strategy. By extracting a cool-mist inside the grow tent, the humidifier will raise the relative humidity in the grow tent.
5. Hang A Wet Towel
Hanging a damp towel or placing a bucket of water near air intakes is one obvious solution for misting down your walls and increasing humidity.
This permits a significant amount of moisture to be absorbed into the atmosphere.
Soak the towels in water before spreading them throughout the grow tent. Place them near any air vents on the edges of your tent.
The towels will be struck by the air as it enters the tent. The humidity level rises as moisture evaporates from the towels.
To avoid burning the towels, make sure to keep them away from growing lamps and other heat sources.
Towels are not intended to be a long-term solution, but they can quickly increase humidity levels.
Use the towels in any tent as long as there is a place to hang them. Tall tents with an inside fan blowing air in toward the ceiling are the best option. You might also hang them near ground-level air vents.
On the other hand, a towel dries quickly and will need to be re-wet from time to time. Furthermore, a pot or pan of water will not always produce the appropriate relative humidity.
6. Remove Half of Your Fluorescent Lights
Regrettably, the most common fixes are frequently missed. By removing half of your fluorescent tubes, you can lower the temperature in your grow tents.
Don’t worry; the light intensity will not bother you. Your newborn plants do not require much light right now.
The science is straightforward in this case. You are probably aware that as the temperature rises, humidity falls.
By the way, fluorescent lights produce heat. In short, they reduce humidity.
As a result, eliminating half of the fluorescent lamps is a simple technique to increase humidity in the growing area.
7. Reduce Your Extraction Fan Speed to Minimum
Suppressing a grow tent is essential since it allows you to better monitor or manages moisture content for your plants. Proper ventilation ensures that air flows freely into and out of your grow tent.
Furthermore, fans allow for proper air circulation and distribution to your growing plants. As a result, when you have sufficient air circulation, you can prevent hazardous germs. Such as fungi and bacteria from growing or staying inside your tent.
To save moisture at various stages of plant growth, a few specialists generally set their fans at a moderate pace.
A word of caution, if you use high-speed fans, the air will dry up faster than usual.
Similarly, using high-powered fans will prevent water vapor from resting on the surface of your plant’s leaves and being absorbed.
As a result, the plants are deprived of moisture, which can lead to dehydration and desiccation. You may also try limiting the number of fans in your grow tent to increase the humidity.
To maintain relative humidity, setting the fans to 60% is highly recommended.
8. Make Use of Water Spray Bottle
Apply a slight coating of water to both sides of the leaves. The additional water will raise the humidity level. And your plants will receive fresh water almost immediately.
It is best for seedlings and cuttings that cannot absorb water through their roots. Suppose you want to keep the humidity level high for a long time. Check back each morning and spritz all of the plants again if the humidity level has dropped.
Misting does not significantly increase humidity, and it must be done regularly to maintain the relative humidity level.
It is preferable to mist plants first thing in the morning so that the leaves can dry out during the day. They will not get too much wet this way.
Plants absorb water through pores in their leaves because the majority of the holes are on the bottom, mist under each leaf.
9. Lower the Surrounding Temperature
Indoor gardeners are well-versed in how to chill a grow tent to increase water vapor. But it becomes more complicated when temperature regulation is involved.
Bear in mind that because cold air has a higher density than hot air, it sinks to the bottom.
A lower temperature usually indicates that the air is moist and contains a significant amount of water vapor. Similarly, lowering the ultraviolet light intensity can help generate water vapor, but only if it is sufficient to evaporate.
10. Place Water Bowls in the Tent for a More Gradual Boost
Load your sink with bowls or trays, then sprinkle them throughout the grow tent. Put the water containers near the air vents. Also, place them on the one side of many tents, where there is a large intake fan near the ground. The humidity level will grow as the water evaporates.
Water bowls are convenient because they may be refilled or removed as needed. They are more effective than towels at maintaining constant humidity in the tent.
In large tents with plenty of floor area and air vents, use bowls. They are particularly effective in tents with a ground-level interior ventilation fan.
11. Stock Up on Water Sources
Another inexpensive technique to enhance humidity in a grow tent is to increase your water supply and distribute it properly. Water trays are frequently placed near air intake tubing or passive air apertures.
Similarly, placing wet sponges near growth trays is effective. The heat from a grow lamp, or an air conditioner can evaporate the water in the sponges over time. Which will eventually increase the humidity in your grow tent.
A gentle warning to utilize clean water in your grow tent to avoid the growth of hazardous fungi or germs.
Damp sponges should not be placed near lighting or fans for safety reasons. When fans and grow bulbs come into touch with water, they might cause a short circuit.
12. Adding an Air Conditioner to Your Tent to Reduce Temperatures
Gardeners raise the temperature of an air conditioner or lower the temperature of a heater to get high humidity in a grow tent.
If your current air conditioner is not sufficient for your grow room, you will need to replace it or install a new one.
Although it may be costly, it is another alternative to consider if you have exhausted all other possibilities.
This time, make sure you calculate the AC unit you will need to keep your grow space cool. Calculate the combined output you will need if you are installing a new air conditioner.
Gardeners must know how to boost and control the humidity in a grow tent. Temperature alone is insufficient because moisture can have an impact on the yield of your culture.
Most of the Gardeners used to be unaware of this requirement, which resulted in either letting plants dry out or scrambling to find quick ways to increase humidity.
A tent will hamper your crops’ development and growth with low humidity. It may cause moisture and lower returns in the long run.
This is why you should learn how to make a grow tent more humid. It can be accomplished with the use of a humidifier or with the help of simple substances.
We will discuss the many cost-effective techniques in this helpful article. To assist you in protecting your plants by ensuring that they are grown in a humidified environment.
So, if you have been looking for a solution to make your grow tent more humid, stay reading!
You may raise the humidity in your grow tent in a variety of ways. This article will assist you in determining viable solutions and remedies to increasing humidity in grow tents.
Finally, high humidity levels in your grow tent are critical for your plants’ growth and wellbeing.
Keep in mind that managing humidity necessitates considering other variables of indoor horticulture, such as temperature, ventilation, and light.
All the alternatives discussed above are cost-effective, so your only job is deciding which is best for your grow tent’s conditions.